Rotary Tables

I-Workholding-Rotary-Tables

4" Rotary Table and Accessories

Rotary-Table-Combi-Set-4in

4" Rotary Table comes complete with Chuck Backplate (for 80mm 3 jaw or 4 jaw chuck), 2 Hold-down Clamps and 4 T-Nuts.

Rotary Table Combi Set also includes Tailstock and Dividing Plate Set.

May be used horizontally or vertically.

Table Diameter 100mm
Length 140mm
Width (excl. h/wheel) 126mm
Height 73mm
Bore Taper MT2
T-Slot Width 8mm
Locating Key Width
(to fit milling table T-slot
when mounted vertically)		 10mm
Centre Height
(Mounted Vertically)		 68mm
Gear Ratio 1:72
Handwheel Divisions 2'
Min. Vernier reading 10"
Chuck Backplate
Register		 55mm
Dividing Plate
Divisions		 6 - 1080

Cletus Berkeley has written a useful guide on how to use a rotary table including 'basic' gear cutting. Download the Guide (1.7Mb). (Adobe Acrobat Reader required)

130-030-00097 4" Rotary Table £137.50 In Stock View Basket
130-030-00099 Tailstock for 4" Rotary Table £36.00 In Stock View Basket
130-030-00098 Dividing Plate Set for 4" Rotary Table £32.00 In Stock View Basket
130-030-00100 4" Rotary Table Combi Set £185.00 In Stock View Basket
040-040-00100 Lathe Chuck Std. 3-Jaw Self Centering 80mm £50.00 In Stock View Basket
040-040-01000 Lathe Chuck 4 Jaw Self Centering 80mm £58.50 In Stock View Basket
040-040-00500 Lathe Chuck 4-Jaw Independent 80mm £50.00 In Stock View Basket

6" Rotary Table and Accessories

Rotary-Table-Combi-Set-6in-2

6" Rotary Table comes complete with Chuck Backplate (for 125mm 3 jaw or 4 jaw chuck, or 125mm ER32 lathe collet chuck), 2 Hold-down Clamps and 4 T-Nuts

Rotary Table Combi Set also includes Tailstock and Dividing Plate Set.

May be used horizontally or vertically.

Table Diameter 150mm
Length 178mm
Width (excl. h/wheel) 176mm
Height 90mm
Bore Taper MT2
T-Slot Width 10mm
Locating Key Width
(to fit milling table T-slot
when mounted vertically)		 12mm
Centre Height
(Mounted Vertically)		 98mm
Gear Ratio 1:72
Handwheel Divisions 2'
Min. Vernier reading 10"
Chuck Backplate
Register		 95mm
Dividing Plate
Divisions		 6 - 1080
130-030-00127 6" Rotary Table £225.00 In Stock View Basket
130-030-00129 Tailstock for 6" Rotary Table £65.00 In Stock View Basket
130-030-00128 Dividing Plate Set for 6" Rotary Table £64.00 In Stock View Basket
130-030-00130 6" Rotary Table Combi Set £321.00 In Stock View Basket
040-040-00300 Lathe Chuck Std. 3-Jaw Self Centering 125mm £60.00 In Stock View Basket
040-040-01050 Lathe Chuck 4 Jaw Self Centering 125mm £75.00 In Stock View Basket
040-040-00700 Lathe Chuck 4 Jaw Independent 125mm £65.00 In Stock View Basket
050-110-32650 ER32 Lathe Collet Chuck - 125mm Dia £35.95 In Stock View Basket

4" Rotary Table with Stepper Motor

Rotary-Table-and-Stepper

This is our standard 4in Rotary Table fitted with one of our 180Ncm Hybrid Stepper Motors.

The motor is wired with a robust 4 way XLR plug, ready to connect straight into a DivisionMaster Indexing Controller. It may also be connected directly to a bipolar stepper drive and used as a fouth axis on your CNC system. (We also sell a compatible XLR chassis socket)

The worm is fitted with Needle Roller Thrust Bearings to minimize backlash and may be adjusted for wear in the future.

Complete with Chuck Backplate for 80mm 3 jaw or 4 jaw chuck. May be used horizontally or vertically.

Table Diameter 100mm
Length 140mm
Width (excl. h/wheel) 126mm
Height 73mm
Bore Taper MT2
T-Slot Width 8mm
Locating Key Width 8mm or 10mm
Centre Height
(Mounted Vertically)		 68mm
Gear Ratio 1:72
Handwheel Divisions N/A
Min. Vernier reading N/A
Chuck Backplate
Register		 55mm
130-030-00300 4" Rotary Table with Stepper Motor £245.00 In Stock View Basket
160-030-00225 4 Way Black Chrome Finish XLR Chassis Socket £3.95 In Stock View Basket
040-040-00100 Lathe Chuck Std. 3-Jaw Self Centering 80mm £50.00 In Stock View Basket
040-040-01000 Lathe Chuck 4 Jaw Self Centering 80mm £58.50 In Stock View Basket
040-040-00500 Lathe Chuck 4-Jaw Independent 80mm £50.00 In Stock View Basket

6" Rotary Table with Stepper Motor

Rotary-Table-and-Stepper-6in

This is our standard 6in Rotary Table fitted with one of our 180Ncm Hybrid Stepper Motors.

The motor is wired with a robust 4 way XLR plug, ready to connect straight into a DivisionMaster Indexing Controller. It may also be connected directly to a bipolar stepper drive and used as a fouth axis on your CNC system. (We also sell a compatible XLR chassis socket)

The worm is fitted with Needle Roller Thrust Bearings to minimize backlash and may be adjusted for wear in the future.

May be used horizontally or vertically.

Complete with Chuck Backplate for 125mm 3 jaw or 4 jaw chuck or 125mm ER32 lathe collet chuck, 2 Hold-down Clamps and 4 T-Nuts

Table Diameter 150mm
Length 178mm
Width (excl. h/wheel) 176mm
Height 90mm
Bore Taper MT2
T-Slot Width 10mm
Locating Key Width 8mm or 10mm
Centre Height
(Mounted Vertically)		 98mm
Gear Ratio 1:72
Handwheel Divisions N/A
Min. Vernier reading N/A
Chuck Backplate
Register		 95mm
130-030-00400 6" Rotary Table with Stepper Motor £395.00 Out of Stock
 		Estimated Back in Stock date: To be advised
Notify me when this item is available
160-030-00225 4 Way Black Chrome Finish XLR Chassis Socket £3.95 In Stock View Basket
040-040-00300 Lathe Chuck Std. 3-Jaw Self Centering 125mm £60.00 In Stock View Basket
040-040-01050 Lathe Chuck 4 Jaw Self Centering 125mm £75.00 In Stock View Basket
040-040-00700 Lathe Chuck 4 Jaw Independent 125mm £65.00 In Stock View Basket
050-110-32650 ER32 Lathe Collet Chuck - 125mm Dia £35.95 In Stock View Basket
Whilst every effort has been made to make the information and prices correct we cannot
accept any responsibility for inaccuracies. Errors & Omissions Excepted.
Copyright © 2010, Arc Euro Trade Ltd. All Rights Reserved.